THE PROBLEM: Power unit runs fine but will not pump any fluid.
Do you have a power unit that is working but not pumping fluid? Before you give us a call, our resident expert tells the fix and it’s so easy to do!
Step 1 – Locate the check valve, the flush plug to the left of the lowering valve.
(See illustration.)
Step 2 – Using an Allen wrench and shop towel – with shop towel in place to catch fluid – loosen the check valve plug 2-1/2 turns to allow it to leak.
Step 3 – Push the START button for one second, then release for three seconds.
Repeat these steps until the unit starts pumping fluid.
Step 4 – Tighten the check valve.